[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[plamo:28123] Re: libata installer
-
From:Mikio Tomioka
-
Date:Thu, 17 May 2007 16:37:20 +0900 (JST)
- Subject: [plamo:28123] Re: libata installer
- From: Mikio Tomioka <mt03605z@xxxxxxxxxxxxx>
- Date: Thu, 17 May 2007 16:37:19 +0900 (JST)
冨岡です@ SATA な環境はまだ持っていません。
> ftp://plamo.linet.gr.jp/Plamo-test/for-4.2x/plamo_installer-libatata2.iso
1.NEC LavieNX(PC-LW2333C) (Mobile Pentium MMX 233MHz)
#lspci -tv /* (installer の lspci 結果ではないです。) */
-+-[05]---00.0 Broadcom Corporation: Unknown device 4318
\-[00]-+-00.0 Intel Corporation 430TX - 82439TX MTXC
+-02.0 Neomagic Corporation NM2160 [MagicGraph 128XD]
+-03.0 Ricoh Co Ltd RL5c478
+-03.1 Ricoh Co Ltd RL5c478
+-05.0 Agere Systems (former Lucent Microelectronics) 56k WinModem
+-07.0 Intel Corporation 82371AB/EB/MB PIIX4 ISA
+-07.1 Intel Corporation 82371AB/EB/MB PIIX4 IDE
+-07.2 Intel Corporation 82371AB/EB/MB PIIX4 USB
\-07.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI
にて dmesg の抜粋
---------------------------------------------
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
ata_piix 0000:00:07.1: version 2.00ac7
ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
scsi0 : ata_piix
ata1.00: ATA-5, max UDMA/66, 19640880 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/33
scsi1 : ata_piix
ata2.00: ATAPI, max MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-210 JS2O PQ: 0 ANSI: 5
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: Attached scsi disk sda
scsi 1:0:0:0: CD-ROM MATSHITA CD-ROM CR-172 S16E PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 20x/20x cd/rw xa/form2 cdda pop-up
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Fusion MPT base driver 3.04.03
================================================
2.GigaByte GA-8GE800 Pro (Intel 845GE chipset)
(+ Celeron(R) CPU 2.40GHz)
+ ATA133PCI(SIL680) - (kurouto shikou)
#lspci -tv /* (installer の lspci 結果ではないです。) */
-[00]-+-00.0 Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
+-01.0-[01]----00.0 nVidia Corporation NV34 [GeForce FX 5200]
+-1d.0 Intel Corp. 82801DB (ICH4) USB UHCI #1
+-1d.1 Intel Corp. 82801DB (ICH4) USB UHCI #2
+-1d.2 Intel Corp. 82801DB (ICH4) USB UHCI #3
+-1d.7 Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
+-1e.0-[02]--+-03.0 CMD Technology Inc PCI0680
| +-07.0 VIA Technologies, Inc. IEEE 1394 Host Controller
| \-08.0 Intel Corp. 82801BD PRO/100 VE (CNR) Ethernet Controller
+-1f.0 Intel Corp. 82801DB (ICH4) LPC Bridge
+-1f.1 Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage Controller
+-1f.3 Intel Corp. 82801DB/DBM (ICH4) SMBus Controller
\-1f.5 Intel Corp. 82801DB (ICH4) AC'97 Audio Controller
にて dmesg の抜粋
------------------------------------------
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
ata_piix 0000:00:1f.1: version 2.00ac7
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/133, 120103200 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.01: ATA-7, max UDMA/133, 160086528 sectors: LBA
ata1.01: ata1: dev 1 multi count 16
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y060L0 YAR4 PQ: 0 ANSI: 5
SCSI device sda: 120103200 512-byte hdwr sectors (61493 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 120103200 512-byte hdwr sectors (61493 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
pata_sil680 0000:02:03.0: version 0.4.1
sil680: BA5_EN = 1 clock = 00
sil680: BA5_EN = 1 clock = 10
sil680: 133MHz clock.
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 16 (level, low) -> IRQ 17
ata3: PATA max UDMA/133 cmd 0x9000 ctl 0x9402 bmdma 0xA000 irq 17
ata4: PATA max UDMA/133 cmd 0x9800 ctl 0x9C02 bmdma 0xA008 irq 17
scsi2 : pata_sil680
ata3.00: ATA-6, max UDMA/100, 78165360 sectors: LBA
ata3.00: ata3: dev 0 multi count 16
ata3.01: ATA-6, max UDMA/100, 78165360 sectors: LBA
ata3.01: ata3: dev 1 multi count 16
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/100
scsi3 : pata_sil680
ATA: abnormal status 0x7F on port 0x9807
scsi 2:0:0:0: Direct-Access ATA ST340015A 3.01 PQ: 0 ANSI: 5
SCSI device sdc: 78165360 512-byte hdwr sectors (40021 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdc: 78165360 512-byte hdwr sectors (40021 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4
sd 2:0:0:0: Attached scsi disk sdc
scsi 2:0:1:0: Direct-Access ATA ST340810A 3.99 PQ: 0 ANSI: 5
SCSI device sdd: 78165360 512-byte hdwr sectors (40021 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdd: 78165360 512-byte hdwr sectors (40021 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 sdd3 sdd4
sd 2:0:1:0: Attached scsi disk sdd
Fusion MPT base driver 3.04.03
---------
とみおか
- References
-
- [plamo:28105] libata installer, KOJIMA Mitsuhiro
- [plamo:28106] Re: libata installer, 名倉昭一
- [plamo:28108] Re: libata installer, KOJIMA Mitsuhiro
[検索ページ]
[メール一覧]
Plamo ML 公開システム