[plamo:20847] Re: CDplamo-0.3(Re: CDplamo-0.2)

[Takehiko ogata]

尾形です。

Intel D865GBF mem=2GB でちょっとだけautoテストしてみました。
bash-2.05b# lspci
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller
(rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated
Graphics Device (rev 02)

KOJIMA Mitsuhiro wrote:

>・CD ドライブを ide-scsi 経由の /dev/scd0 ではなく，/dev/hd[a-h]，
>  /dev/scd[0-7] を実際にマウントして確認するように変更
>
bash-2.05b# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/ram0 7163 4255 2908 60% /
/dev/hdd 331104 331104 0 100% /cdrom
/tmpfs 451668 0 451668 0% /dev/shm
/tmpfs 451668 836 450832 1% /tmpfs

8:17am up 27 min, 1 user, load average: 0.00, 0.00, 0.01
45 processes: 43 sleeping, 2 running, 0 zombie, 0 stopped
CPU states: 0.4% user, 0.0% system, 0.0% nice, 99.6% idle
Mem: 903340K av, 81472K used, 821868K free, 0K shrd, 12500K buff
Swap: 0K av, 0K used, 0K free 38040K cached

/dev/shmはマウントしない方がわかりやすいと思います。
メモリーがなぜか1GBしか認識していないようです。

Xは800x600で表示されました。どのへんの情報があると良いのかわかり
ませんがXFree86.0.logの最後の方は以下のようです。少々長いですが。

(II) Primary Device is: PCI 00:02:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.6
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDEV(0): Depth 16, (--) framebuffer bpp 16
(==) FBDEV(0): RGB weight 565
(==) FBDEV(0): Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): Hardware: Intel(R) 865G (vidmem: 16184k)
(II) FBDEV(0): Checking Modes against framebuffer device...
(II) FBDEV(0): mode "1024x768" test failed
(II) FBDEV(0): mode "800x600" ok
(II) FBDEV(0): mode "640x480" ok
(II) FBDEV(0): Checking Modes against monitor...
(--) FBDEV(0): Virtual size is 800x600 (pitch 800)
(**) FBDEV(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz),
35.2 kHz, 56.2 Hz
(II) FBDEV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync
(**) FBDEV(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz),
31.5 kHz, 60.0 Hz
(II) FBDEV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525
-hsync -vsync
(==) FBDEV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(**) FBDEV(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(==) FBDEV(0): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "Auto"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Couldn't load XKB keymap, falling back to pre-XKB keymap
(II) Server_Terminate keybinding not found
(--) Mouse1: PnP-detected protocol: "PS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded

では