[plamo:20718] Re: CDplamo-0.1

[KAJIWARA, Atsushi]

梶原です。

KOJIMA Mitsuhiroさんの<20030922.204839.74749306.kojima@linet.gr.jp>から
>まだまだ手元のごく限られた環境でしかテストしていないので，皆さんのお手
>元の環境で試してみて，動作の可否を報告していただけると幸いです．

ASUS P4P800(standard) Intel 865PE, ICH5R
Pentium 4 2.60CGHz RAM 512MB
RADEON 9600
onboard 3Com Gigabit LOM (3C940)
SB Live!
80G(ATA)+60G(ATA)+80G(SATA)
ATAPI DVD-ROM drive

Plamo3.3のインストールCDもブート途中で止まるので、だめかもなー
とは思っていたんですが、やっぱだめでした(^^;

>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
>Real Time Clock Driver v1.10e
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>Linux agpgart interface v0.99 (c) Jeff Hartmann
>agpgart: Maximum main memory to use for agp memory: 439M
>agpgart: Detected an Intel(R) 865G, but could not find the secondary device. Assuming a non-integrated video card.
>agpgart: Detected Intel(R) 865G chipset
>agpgart: AGP aperture is 32M @ 0xfc000000
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 00:1f.1
>PCI: Enabling device 00:1f.1 (0005 -> 0007)
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>ICH5-SATA: IDE controller at PCI slot 00:1f.2
>ICH5-SATA: chipset revision 2
>ICH5-SATA: 100% native mode on irq 5
>    ide2: BM-DMA at 0xef90-0xef97, BIOS settings: hde:DMA, hdf:pio
>    ide3: BM-DMA at 0xef98-0xef9f, BIOS settings: hdg:pio, hdh:pio
>hda: Maxtor 6Y080L0, ATA DISK drive
>hdb: IC35L060AVER07-0, ATA DISK drive
>blk: queue c0435740, I/O limit 4095Mb (mask 0xffffffff)
>blk: queue c043587c, I/O limit 4095Mb (mask 0xffffffff)
>hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
>hde: Maxtor 6Y080M0, ATA DISK drive
>blk: queue c0435fe8, I/O limit 4095Mb (mask 0xffffffff)
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide2 at 0xefe0-0xefe7,0xefae on irq 5
>hda: attached ide-disk driver.
>hda: host protected area => 1
>hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63, UDMA(100)
>hdb: attached ide-disk driver.
>hdb: host protected area => 1
>hdb: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=7476/255/63, UDMA(100)
>hde: attached ide-disk driver.

ここまでで固まりました。SATAのせいでしょうかね?

#こゆのって手で書き写すしかないんでしょうか? 疲れた…＿|￣|○

-- 
KAJIWARA, Atsushi mailto:kajiwara@chldren.net